HUDY Formula rubber tires were long-term tested to ensure the finest quality, longest lifespan, best stability, and maximum performance 

• comm lathe for modified motors
• black hard-anodized surface
• selected stands with ball-bearing guides (Hudy patent) and plastic clips for armature
• stands keyed to common channel for perfect alignment
• ultra-fine pitch lead screw for super-accurate tool movement
• super-accurate backlash limitation of the tool block and supports ensures vibration-free movement
• installed slave motor, connection cable, switch box
• engraved unique ID
• all accessories included 

• comm lathe for modified motors
• black hard-anodized surface
• selected stands with ultra-hardened steel "V" guides and plastic clips for armature
• stands keyed to common channel for perfect alignment
• ultra-fine pitch lead screw for super-accurate tool movement
• super-accurate backlash limitation of the tool block and supports ensures vibration-free movement
• installed slave motor, connection cable, switch box
• engraved unique ID
• all accessories included  

Black anodized base board for comm lathes 101000, 101001 and 101100. 

Black anodized bottom support for comm lathes 101000, 101001, 101100, 101400, 101401, 101500, 15001, 101506 and 101506-B. 

Black anodized cutting tool head for comm lathes 101000, 101001, 101100, 101400, 101401, 101500, 15001, 101506 and 101506-B.  

Tough plastic clips used to secure armature to comm lathe stands. Set of two. 

Set of two support stands for modified motor armatures. Each stand comes with high-speed ball-bearings and plastic clip. Fits all HUDY comm lathes. 

Set of two support stands for modified motor armatures. Each stand comes with a hardened steel “V” guide and plastic clip. Fits all HUDY comm lathes. 

Strong rubber transmission belts for HUDY Advanced Comm Lathes. Dimensions 25x2.5mm. Set of three. 

Top quality cutting tool with diamond tip is the ultimate cutting tool for use with all HUDY comm lathes, giving extremely precise, professional results every time. Manufactured under strictest tolerances, all Diamond Cutting Tools are inspected under microscope to ensure perfect quality.
 

Set of four shims to adjust the height of a cutting tool in a Hudy Comm Lathe. Set includes shims of various thickness: 0.2, 0.3, and 0.5mm. 

Plastic box set for HUDY Advanced Comm Lathe for safe and secure transportation and protection of the comm lathe. Set includes top and bottom pieces. Bottom case securely holds the comm lathe during operation, and includes room for anti-vibration pad underneath the lathe. 

• exclusive, great looking alu carrying box
• extremely durable with smooth shiny alu surface
• foam lined interior
• safety lock on the cover
• ergonomic plastic handle
• HUDY logo on outside of case 

• comm lathe for slot motors
• black hard-anodized surface
• selected stands with ultra-hardened steel "V" guides and plastic clips for armature
• stands keyed to common channel for perfect alignment
• ultra-fine pitch lead screw for super-accurate tool movement
• super-accurate backlash limitation of the tool block and supports ensures vibration-free movement
• installed slave motor, connection cable, switch box
• engraved unique ID
• all accessories included  

Set of two support stands for slot motor armatures. Each stand has a hardened steel “V” guide and plastic clip. Fits all HUDY comm lathes. 

Set of two support stands for slot motor armatures. Each stand has ball-bearing guide and plastic clip armatures. Fits all HUDY comm lathes. 

• comm lathe for modified motors
• black hard-anodized surface
• selected stands with ball-bearing guides (Hudy patent) and plastic clips for armature
• stands keyed to common channel for perfect alignment
• revolutionary belt drive system which spins the armature through a middle shaft, and results in vibration-free cut and slave motor extended life
• ultra-fine-pitch lead screws for super-accurate tool movement
• super-accurate backlash limitation of the tool block and supports ensures vibration-free movement
• installed slave motor, connection cable, switch box
• engraved unique ID
• all accessories included  

• comm lathe for modified motors
• black hard-anodized surface
• selected stands with ultra-hardened steel "V" guides and plastic clips for armature
• stands keyed to common channel for perfect alignment
• revolutionary belt drive system which spins the armature through a middle shaft, and results in vibration-free cut and slave motor extended life
• ultra-fine-pitch lead screws for super-accurate tool movement
• super-accurate backlash limitation of the tool block and supports ensures vibration-free movement
• installed slave motor, connection cable, switch box
• engraved unique ID
• all accessories included  

This is a hot new comm lathe with unique middle shaft belt drive system that saves slave motor and results in less vibration. This Multipack contains Hudy Tech Comm Lathe – BBG + Stock Motor Holder Set that allows you to:

1. cut modified motors
2. cut sealed stock motors
3. break in motors  

This is a hot new comm lathe with unique middle shaft belt drive system that saves slave motor and results in less vibration. This Multipack contains Hudy Tech Comm Lathe – HSG + Stock Motor Holder Set that allows you to:

1. cut modified motors
2. cut sealed stock motors
3. break in motors  

Stock motor holder set enables you to convert the HUDY Tech Comm Lathe into a stock motor lathe, so you can cut modified motor armatures and sealed stock motors, as well as break in motors.  

Strong rubber transmission belts for HUDY Multipack Comm Lathes. Set of three belts includes 25x2.5mm (1x) and 30x2.5mm (2x). 

Strong rubber transmission belts for HUDY Tech Comm Lathes. Set of three belts includes 25x2.5mm (1x) and 30x2.5mm (2x). 

Plastic box set for HUDY Tech Comm Lathe for safe and secure transportation and protection of the comm lathe. Set includes top and bottom pieces. Bottom case securely holds the comm lathe during operation, and includes room for anti-vibration pad underneath the lathe. 

• the world's first fully automatic comm lathe
• operation speed adjustment
• revolution in the lathe market
• best choice for professionals

Main features:
• ball-bearing guides
• selected stands with plastic clips
• installed motor, switch, cable
• handy carrying case
• complete accessories included 

• the world's first fully automatic comm lathe
• operation speed adjustment
• revolution in the lathe market
• best choice for professionals

Main features:
• ultra-hardened steel "V" guides
• selected stands with plastic clips
• installed motor, switch, cable
• handy carrying case
• complete accessories included 

• the world's first fully automatic comm lathe for slot car motors
• operation speed adjustment
• revolution in the lathe market
• best choice for professionals

Main features:
• ultra-hardened steel "V" guides
• selected stands with plastic clips
• installed motor, switch, cable
• handy carrying case
• complete accessories included 

• the world's first fully automatic comm lathe for slot car motors
• operation speed adjustment
• revolution in the lathe market
• best choice for professionals

Main features:
• ball-bearing guides
• selected stands with plastic clips
• installed motor, switch, cable
• handy carrying case
• complete accessories included 

Strong rubber transmission belts for HUDY Executive Automatic Comm Lathes. Set of three belts includes 20x2.5mm (2x) and 25x2.5mm (1x). 

Plastic box set for HUDY Executive Automatic Comm Lathe for safe and secure transportation and protection of the comm lathe. Set includes top and bottom pieces. Bottom case securely holds the comm lathe during operation, and includes room for anti-vibration pad underneath the lathe.
 

Adjustable precision commutator support for modified motor armatures. Comes with high-speed ball-bearings and an adjustable clip with ball-bearing.
 

Adjustable precision commutator support for modified motor armatures. Comes with hardened steel “V” groove and an adjustable clip with ball-bearing.
 

Adjustable precision commutator support for slot motor armatures. Comes with hardened steel “V” groove and an adjustable clip.  

Adjustable precision commutator support for slot motor armatures. Comes with ball-bearing guide and an adjustable plastic clips.  

Set of two support stands for modified motor armatures. Each stand has high-speed ball-bearings and an adjustable top clip with ball-bearing. Top clip holds armature better in the guides, resulting in less vibration for a professional-quality cut. Fits all HUDY comm lathes. 

Set of two support stands for modified motor armatures. Each stand has a hardened steel “V” groove and an adjustable top clip with ball-bearing. Top clip holds armature better in the guides, resulting in less vibration for a professional-quality cut. Fits all HUDY comm lathes. 

• the world's best selling fully automatic 12VDC high-end tire truer
• developed & designed by Hudy
• for professional racers

Main features:
• adjustable truing diameter (35-85mm) and truing angle 0°-2°
• tire width cutting adjustment
• regulated speed for fully automatic truing
• transparent plexiglass protective cover
• installed slave motor, gearbox, electronics, and connection cable
• installed cutting tool
• new universal tool holder for all classes – 1/8, 1/10, 1/12
• new improved long-life collecting container for ground rubber
• fuse overload protection
• engraved unique identification number
• delivered in exclusive alu carrying box 

• 12VDC tire truer with manual operation
• developed and designed by Hudy
• adjustable truing diameter (35-85mm) and truing angle 0°-2°
• manual or wheel-operated truing operation
• transparent plexiglass protective cover
• installed cutting saw
• installed slave motor, electronics, and connection cable
• fuse overload protection
• engraved unique identification number
• delivered in exclusive alu carrying box 

Spare motor cover for #102003 tire truer. 

Spare part for #102003 and #102006 tire truers. 

Spare grinding tool mount base for #102003, #102006, #102801, #102802 and #102803 tire truers. 

Spare part for 102003 HUDY Excellent Tire Truer - Fully Automatic 1/8, 1/10, 1/12 – Full Option.  

Spare part for #102003. 

CNC-machined alu operating wheel for HUDY Tire Truers. 

• tool holder for truing 1/8 and 1/10th car wheels
• suitable for Excellent and Power Tire Truer
• for 60 – 80mm diameter tires
• special surface coating
• engraved scale
 

• tool holder for truing 1/10 and 1/12th car wheels
• suitable for all Hudy Tire Truers
• for 40 – 70mm diameter tires
• special surface coating
• engraved scale
 

Standard steel cutting tool for foam tires.
 

• carbide cutting tool fits all Hudy Tire Truers
• best performance for grinding foam tires
• long lifespan 

Spare gearbox mount for #102003 tire truer. 

• exclusive, great looking alu carrying box
• extremely durable
• smooth shiny alu surface
• foam lined interior
• safety lock on the cover
• ergonomic plastic handle
• HUDY logo on outside of case  

Spare gearbox with electromotor for #102003 tire truer. 

Spare part for #102003. 

• precision center balanced wheel adapter for 1/10 on-road Serpent, Picco, and Mugen wheels fits all Hudy Tire Truers
• special clamp-on design, wobble-free
• hard-anodized surface for extra long lifespan
• includes locking nut
 

• precision center balanced wheel adapter for 1/10 onroad Associated pancar wheels fits all Hudy Tire Truers
• special clamp-on design, wobble-free
• hard-anodized surface for extra long lifespan
• includes locking nut
 

• precision center balanced wheel adapter for 1/10 touring car wheels (with 12mm hex drive) fits all Hudy Tire Truers
• special clamp-on design, wobble-free
• hard-anodized surface for extra long lifespan
• includes locking nut
 

• alu locking nut for Touring Car wheel adapter 

• precision center balanced wheel adapter for 1/8 on-road cars - XRAY, Serpent, Mugen, Kyosho, Motonica and Shepherd wheels fits all Hudy Tire Truers
• special clamp-on design, wobble-free
• hard-anodized surface for extra long lifespan
• includes locking nut
 

Alu locking nut for 1/8 on-road wheel adapter #102362 . CNC-machined from high-quality Swiss 7075 T6 aluminum. Black coated. 

• precision center balanced wheel adapter for 1/12 onroad pancar wheels (except Corally) fits all Hudy Tire Truers
• special clamp-on design, wobble-free
• hard-anodized surface for extra long lifespan
• includes locking nut
 

Precision center-balanced wheel adapter for 1/10 & 1/12 on-road pan car wheels features a special clamp-on, wobble-free design. Hard-anodized surface for extra long lifespan.  

Precision center-balanced wheel adapter for 1/10 formula car wheels features a special clamp-on, wobble-free design, and hard-anodized surface for extra-long lifespan. Designed to fit all popular 1/10 formula wheels. 

Notice: Please note that the the wheel adapter does not fit some Yokomo wheels.  

• wheel adapter for 1/18 truck & monster truck foam wheels
• fits all Hudy Tire Truers
• precision center balanced wheel adapter
• special clamp-on design, wobble-free
• hard-anodized surface for extra long lifespan
• includes locking alu nut
• fits XRAY 1/18 truck & monster truck wheels 

• 12VDC tire truer with manual operation for 1/10 and 1/12th scale car tires
• developed and designed by Hudy
• adjustable truing diameter and truing angle 0°-2°
• manual or wheel-operated truing operation
• transparent plexiglass protective cover
• installed cutting saw
• installed slave motor, electronics, and connection cable
• fuse overload protection
• engraved unique identification number
• FRS 977 casing for wheel adapter included  

• 110VAC tire truer with manual operation for 1/10 and 1/12th scale car tires
• developed and designed by Hudy
• adjustable truing diameter and truing angle 0°-2°
• manual or wheel-operated truing operation
• transparent plexiglass protective cover
• installed cutting saw
• installed slave motor, electronics, and connection cable
• fuse overload protection
• engraved unique identification number
• power port on the back panel allows connection of standard computer power cable
• FRS 977 casing for wheel adapter included  

• 220VAC tire truer with manual operation for 1/10 and 1/12th scale car tires
• developed and designed by Hudy
• adjustable truing diameter and truing angle 0°-2°
• manual or wheel-operated truing operation
• transparent plexiglass protective cover
• installed cutting saw
• installed slave motor, electronics, and connection cable
• fuse overload protection
• engraved unique identification number
• power port on the back panel allows connection of standard computer power cable
• FRS 977 casing for wheel adapter included  

• casing to fit wheel adapters on all Universal Tire Truers
• originally included with the Universal Tire Truer
 

Spare part of Middle Support Block for #103100 HUDY Slot Tire Truer and #103200 HUDY Micro Tire Truer. 

• abrasive disk pressed on CNC-machined spindle shaft
• special manufacturing technique ensures perfectly uniform abrasion surface
• suitable for Slot Tire Truer and Micro Tire Truer
• mounted on ball-bearings (not included) to ensure perfect quality, zero-vibration grinding
 

Optional abrasive disk for #103100 - Slot Car Tire truer with a coarse thicker grain for rougher tire grinding.  

Spare abrasive disk cover for 103100 and 103200 tire truer. 

Spare part grinding drum pulley for HUDY Tire Truers 103100 and 103200. 

• wheel axle for Slot Tire Truer
• fits 3/32” slot car wheels
 

• wheel axle for Slot Tire Truer
• fits 1/8” slot car wheels
 

Precision-machined 2.0mm wheel axle for #103100 Hudy Slot Tire Truer. Perfectly balanced and zero runout for smooth, vibration-free operation. Includes factory-installed collar.
 

• precision-machined 3.0mm wheel axle fits Hudy Slot Tire Truer 

Spare part of Axle Support Pin for #103100 HUDY Slot Tire Truer and #103200 HUDY Micro Tire Truer. 

• specially-designed and manufactured slicing needle to adjust width of slot car tires
• fits #103100 Slot Tire Truer
• high-strength, long life
 

- best selling tire truer in the slot car market
- black hard-anodized surface with Hudy???s traditionally high quality and stylish looks
- adjustable grinding of tire diameter and angle
- adjustable tire width (using covered slicing needle)
- specially-designed and manufactured grinding drum for highest-quality grinding
- for foam tires
- spindle shaft and wheel axle are ball-bearing supported to eliminate all vibrations during operation
- installed slave motor, switch box, and connection cable
- both wheel axles 1/8" + 3/32" included
- new improved long-lifespan handy carrying case
- works with 12V - 30-40AMP power supply 

• world’s first and best micro tire truer for micro wheels
• based on best selling slot tire truer
• black hard-anodized surface with Hudy’s traditionally high quality and stylish looks
• adjustable grinding of tire diameter and angle
• specially-designed and manufactured grinding drum for highest-quality grinding
• spindle shaft and wheel axle are ball-bearing supported to eliminate all vibrations during operation
• installed slave motor, switch box, and connection cable
• long-lifespan handy carrying case included 

• wheel adapter for mounting 1/18th HPI Micro RS4 wheel on #103200 Micro Tire Truer
• CNC-machined from high-grade duraluminum
 

CNC-machined alu wheel adapter to mount hex-drive micro wheels on #103200 HUDY Micro Tire Truer for 1/18 + 1/24. Includes nut and setscrew. 

• wheel adapter for mounting 1/24th Kyosho Mini-Z wheel on #103200 Micro Tire Truer
• CNC-machined from high-grade duraluminum
 

HUDY Air Vac is a handy, ultra-compact electric-powered vacuum pump for on-road shock absorbers, developed to quickly & easily bleed unwanted air bubbles from oil-filled shock absorbers and differentials.  

HUDY Air Vac with integrated tray is a handy, ultra-compact electric-powered vacuum pump for on-road shock absorbers, developed to quickly & easily bleed unwanted air bubbles from oil-filled shock absorbers and differentials. 

HUDY Air Vac is a handy, ultra-compact electric-powered vacuum pump for 1/10 off-road shock absorbers, developed to quickly & easily bleed unwanted air bubbles from oil-filled shock absorbers and differentials. 

HUDY Air Vac is a handy, ultra-compact electric-powered vacuum pump for 1/8 off-road shock absorbers, developed to quickly & easily bleed unwanted air bubbles from oil-filled shock absorbers and differentials. 

Professional, ultra-compact work tray for HUDY Air Vac. CNC-machined from 1-piece aircraft aluminum. Extremely durable and wear resistant. Black coated.  

Transparent plastic cover with stylish HUDY graphics is included standardly in #104002 HUDY Air Vac - On-Road but fits and can be also used in #104004 HUDY Air Vac – 1/10 Off-road.  

Transparent plastic cover with stylish HUDY graphics is included standardly in #104004 HUDY Air Vac 1/10 Off-road but fits and can be also used in #104002 HUDY Air Vac On-Road.
 

Transparent plastic cover with stylish HUDY graphics is included standardly in #104005 HUDY Air Vac - 1/8 Off-Road and is NOT compatible with other HUDY Air Vac for other scales.  

Shock holder for on-road shock absorbers.  

Shock holder for 1/8 off-road shock absorbers.  

Shock holder for 1/8 off-road shock absorbers. 

Vacuum Pump Post & Shock Holder - 1/10 Awesomatix 

Differential holder for On-Road & 1/10 Off-Road HUDY Air Vac – Vacuum Pump. Black coated. 

Connecting cable 600mm with 4mm gold-plated banana plugs on both sides. Can be used with any HUDY Air Vac – Vacuum Pump. 

300mm connecting cable with 4mm gold-plated banana plugs on both sides. Can be used with any HUDY Air Vac – Vacuum Pump.  

600mm connecting cable with 4mm gold-plated banana plugs on one side and crocodile clips on the other side. C 

Set of internal cables with red button switch for any HUDY Air Vac – Vacuum Pump. 

The HUDY Engine Break-In Bench is the ultimate tool for easy, safe, and professional break-in of your .12/.15/.21 engine, and suits all bump-start SG crank engines. Allows for a controlled break-in process that reduces wear & tear on engine components and increases performance, reliability, and longevity. Constructed of top-quality components of tough aluminum and spring steel, the Break-In Bench comes partially assembled from the factory to get you running sooner.  

Large 500cc capacity fuel bottle of specially-mixed plastic material is easy to squeeze yet easily returns to its original shape. The long, black-anodized aluminum spout with curved neck is threaded into the bottle neck, and the airtight rubber cap prevents spillage. Smooth, simple design. 

• unique micro starter box for 1/18 nitro micro cars
• ultra-small and compact size
• very light weight, only 575g / 1.27lb (w/o batteries)
• powered by powerful 540 type motor
• fully assembled, ready to use
• powered with a standard 7.2V battery stick pack (not included)
• premium quality, long-life drive belt system
• adjustable posts
• high-quality black coated aluminum one-piece housing provides extra durability 

The HUDY Star-Box is a unique starter box designed for 1/10 & 1/8 nitro on-road cars; the ultimate star among all starter boxes on the market! This world’s lowest, ultra-compact starter box design has a very light weight, only 575g / 1.27lb (w/o batteries). The Star-Box has an ultra-cool stylish design and comes fully assembled, ready to use. 

Conversion set for #104400 HUDY STAR-BOX ON-ROAD 1/10 & 1/8 allows to convert the starter box to be used with LiPo batteries. 

Conversion set for the #104400 HUDY on-road starter box allows perfect fitment of the RX8. 

Professional starter box designed for 1/8 off-road cars, truggies and GT cars; the ultimate star among all starter boxes on the market! The world's lowest, ultra-compact starter box with lightweight design has bracket plate posts to fit most 1/8 off-road cars, truggies and GT cars.  

Spare steel bushing for 1/8 Off-Road Star-Box. 

Optional cable will allow to use LiPo batteries in the On-road starter box #104400 and Off-road starter box #104500.  

HUDY Tire Stick has a unique authentic snap-on one-piece design that allows to store a set of 1/8 on-road, 1/8 off-road tires or 1/8 GT tires. The design of the tire stick allows extremely easily to insert the tire on the stick and remove it easily as well without any need of additional locking nuts. The one-piece snap-on design ensures the tires will not fall out from the stick during storage, transport or while handling with the tire sets.  

HUDY Tire Mounting Bands allow for a perfect bond between the tire and wheel and help to make the gluing tires easier.  

HUDY Tire Mounting Bands allow for a perfect bond between the tire and wheel and help to make the gluing tires easier.  

HUDY Tire Mounting Bands allow for a perfect bond between the tire and wheel and help to make the gluing tires easier.  

HUDY Tire Mounting Bands allow for a perfect bond between the tire and wheel and help to make the gluing tires easier.  

???? universal tire balancing station for all wheels
???? redesigned lightweight version
???? identifies the smallest inaccuracies of tire balance
???? identifies improperly glued rubber tires
???? identifies differences in inserts
???? precision-balanced tires improve car traction & stability
???? optional wheel adapters 1/10, 1/8, 1/6 & 1/5 wheels
???? smart clamping system prevents binding of wheel adapter
???? quick & easy to use
 

Wheel adapter for 1/5 On-road Car & 1/6 Buggy wheels for #105500 HUDY Universal Tire Balancing Station. 

• Wheel adapter for 1/8 off-road cars, truggy & rally game wheels for #105500 HUDY Universal Tire Balancing Station
• CNC-machined lightweight alu wheel adapter with 1-piece super-strong and precision-finished steel rod
• Perfectly smooth, free rotation
• High-quality, high-precision ball-bearings degreased and lightly oiled for ultra-fine wheel rotation
• Wheel adapter hex mount fits precisely into wheel
• Precision-balanced tires improve car traction and stability, improve shock absorber action
• Machined tightening nut for fast and comfortable wheel tightening 

- Wheel Adapter for 1/10 On-road & 1/10 Off-road & 1/10 truck & 1/10 truggy 12mm hex for#105500 HUDY Universal Tire Balancing Station
- CNC-machined lightweight alu wheel adapter with 1-piece super-strong and precision-finished steel rod
- Perfectly smooth, free rotation
- High-quality, high-precision ball-bearings degreased and lightly oiled for ultra-fine wheel rotation
- Wheel adapter hex mount fits precisely into wheel
- Precision-balanced tires improve car traction and stability, improve shock absorber action
- Machined tightening nut for fast and comfortable wheel tightening 

Wheel adapter for 1/10 off-road 14mm wheels for #105500 HUDY Universal Tire Balancing Station. 

This special balancing putty is used to perfectly balance the wheels and tires to reduce vibration.  

A "must have" item for racers of all levels, HUDY is the first to bring you a tool that will not only save you money, but will also save you precious time at the track or at home.

The new compact, heavy-duty HUDY #10 6000 tool set will allow you to quickly and easily change worn pins in a matter of minutes. 

Spare tool body for the drive pin replacement tool #106000. 

Spare ejector for #106000 HUDY Drive Pin Replacement Tool (for 3mm Pins).  

Spare ejector Pivot Pin for #106036 HUDY Ejector Pivot Pin & Alternating Pivot (for 2.5mm Pins) 

Spare ejector Pivot Pin for 106000 HUDY Drive Pin Replacement Tool (for 3mm Pins). 

Ejector pivot pin 2.5mm and alternating pivot 2.5mm for use with #106000 HUDY Drive Pin Replacement Tool to replace 2.5mm drive pins in drive shafts. 

Polished, hardened steel drive shaft pins, 3mm dia x 14mm length. Set of 10. 

Polished, hardened steel drive shaft pins, 3mm dia x 12mm length. Set of 10. 

Polished, hardened steel drive shaft pins, 3mm dia x 10mm length. Set of 10. 

Polished, hardened steel drive shaft pins, 2.5mm dia x 10mm length. Set of 10. 

Cleaning gum helps you to keep your car and working area clean. 

• For quick & easy parts maintenance
• Perfect for cleaning bearings, screws and hardware
• Cleaning sieve included
• Compact size
• Chemical resistant

HUDY Wash Box helps to remove dust and dirt of the RC hardware such as bearings, screws, drive shaft couplings, etc. Parts to be cleaned are inserted in the sieve of the Wash Box with adding break cleaner and shaking the Wash Box the parts will clean. The Wash Box is resistant against chemicals and has compact size of 28mm length and 58mm height.
 

HUDY Graphite Grease is a high-performance, advanced-technology semi-fluid lubricant which incorporate both extreme pressure additives and finely dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions. The grease reduces wear and increase the parts life.  

HUDY Diff Grease is a high-performance, model racing car general-purpose silicone based grease, formulated to provide extra protection against wear, corrosion, and water.  

HUDY Super Diff Grease is a high-performance, model racing car general-purpose silicone-based grease. With a thicker viscosity than standard diff grease, the Super Diff Grease stays on the diff plates longer, prolonging diff lifespan. 

HUDY Joint Grease is specially blended to be used on all joints in RC cars. HUDY’s own secret blend of grease was long-term tested by the team and is recommended for use in all conditions.  

HUDY Bearing Grease is an extended-life multipurpose lubricant for ball bearings and is a direct replacement for the grease delivered in ball-bearings. HUDY Bearing Grease combines an optimized additive package with proven synthetic-base oils and a robust lithium complex thickener system to provide outstanding protection against wear, rust, high temperature degradation and demanding startup and heavy loading conditions.  

HUDY Bearing Grease Blueis an advanced lubricant incorporating both extreme pressure additives and finely dispersed graphite for load carrying. The Extra lubricant is an advanced replacement for the standard bearing grease. The HUDY Bearing Grease Blue is formulated to have excellent adhesion and resistance to “fling-off” under extreme conditions and provides outstanding protection against wear, rust, high temperature degradation and demanding startup and heavy loading conditions.  

HUDY Bearing Grease Red is a supreme-performance lubricant for extreme overload conditions in highly-loaded bearings. The grease combines the unique features of synthetic-base fluids with those of a high-quality lithium complex thickener. The wax-free nature of synthetic fluids and low coefficient of friction provide very low running torque. This grease reduces operating temperatures in the load zone of spherical roller- and ball-bearings.  

High-quality HUDY Bearing Oil is used to lubricate bearings for ultra-smooth operation and long lifespan. Very good for use on dusty tracks and carpet tracks because it helps combat the effects of dust and carpet hair contamination. Super thin to help promote quick penetration and fast & easy coverage. Recommended for use immediately after bearing cleaning (e.g. with spray cleaner). This oil is used only for bearings in a car, not inside the engine.  

High-quality HUDY One-Way Bearing Oil is used to lubricate one-way bearings for ultra-smooth operation and long lifespan. Super thin to help promote quick penetration and fast & easy coverage. One drop will cure a slipping one-way immediately! Recommended for nitro & electric touring cars, before each race or practice day. A "must have" item for serious racers. 

High-quality HUDY Bearing Oil is used to lubricate bearings for ultra-smooth operation and long lifespan.  

Specially-developed high-quality air filter oil is extra sticky and easily applied to the air filters of any nitro car. This air filter oil is sticky enough to stop dirt and dust, while still allowing airflow to ensure no loss of performance. Filled in perfect handy 50ml bottle, made in Europe. Blue color. 

The Air Filter Sealant is used between the sides of the foam filter and the plastic part of the filter to perfectly seal the contact area to ensure no dust will pass through.  

Specially-developed high-quality engine after-run oil to be used in any nitro engine for engine bearings, piston, sleeve, conrod and you can use also on crankshaft in case it does not have DLC coating. The oil on crankshaft will prevent from corrosion. Engine corrosion protection oil used when storing engine after run. Filled in perfect handy 50ml bottle, made in Europe. Orange color.

 

New, excellent tire additive especially recommended for carpet.  

Excellent tire additive for both asphalt and carpet tracks.  

Excellent tire additive especially recommended for asphalt 

A new bestseller! HUDY Body Fix is the ultimate body fix for all your racing bodies. This specially-formulated glue fixes a damaged or broken body, and may also be applied to a new body to significantly increase the strength, reinforce weak areas, and extend the lifespan of the body. A "must have" for every driver. 

HUDY Body Fix 2 is the next generation of the extremely popular HUDY Body Fix.  

Solder for the RC professional is 1.0mm thick and 60/40 Sn/Pb. Contains 3.3% flux core. The 3m length of solder is nicely rolled into a tiny tube, yet is easy to pull out through the dispensing hole in the cap. 

XL = 50ml bottle

HUDY Ultimate Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles 

HUDY Premium Silicone Oils available in square bottles 

HUDY Premium Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively for HUDY.  

HUDY Premium Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively for HUDY.  

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively for HUDY.  

HUDY Premium Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively for HUDY.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils are manufactured in Europe, created exclusively for HUDY by a specialized silicone oil manufacturer.  

HUDY Premium Silicone Oils are manufactured in Europe, created exclusively for HUDY by a specialized silicone oil manufacturer.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles 

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

HUDY Premium Silicone Oils available in square bottles.  

HUDY Premium Silicone Oils available in square bottles.  

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XL = 50ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

XXL = 100ml bottle

HUDY Premium Silicone Oil manufactured in Europe by a specialized silicone oil premium manufacturer. 

Ultra thick oil for the gear differentials such as used on the 1/10 eletric and nitro touring cars. 

Ultra thick oil for the gear differentials such as used on the 1/10 eletric and nitro touring cars. 

Ultra-thick oil for gear differentials such as used on 1/10 electric and nitro touring cars. 

Set of 3 empty oil bottles 5ml including plastic nose, steel needle with rubber cap and safety lock.  

Hudy Pinion Puller for easy, safe removal of slot car pinions from 2mm motor shafts, perfect for both 1/32 and 1/24 racing. The unique flat machined pinion rest prevents distortion of the gear during removal, and its ultra-thin cross-section makes it perfect for use in a very confined space. Made from world-renown Hudy Spring Steel™. 

The HUDY Universal Conrod Puller simplifies engine disassembly for maintenance or repair.  

The HUDY Flywheel Puller may be used for the easy and safe removal of nitro engine flywheels. Without a proper tool such as the HUDY Flywheel Puller, it may be difficult to remove an engine flywheel without damaging the flywheel and/or marring the engine crankcase. 

Professional engine maintenance tool kit set includes puller and presser for pulling out and pressing in front & rear engine bearings. Universal components will work with either .12 or.21 engines; exchangeable bushings and optional collets are available for use with different-sized engines. 

Professional engine maintenance tool kit set includes puller and presser for pulling out and pressing in front & rear engine bearings. Universal components will work with either .12 or.21 engines; exchangeable bushings and optional collets are available for use with different-sized engines. 

Collet for extracting 11.5mm ID bearings used in .12 engines, for use with HUDY Engine Bearing Puller set. CNC-machined hardcoated HUDY Spring Steel for incredible durability and lifespan. 

Collet for extracting 11.5-12.0mm ID bearings used in .21 engines, for use with HUDY Engine Bearing Puller set. C 

Collet for extracting 13.0mm ID bearings used in .21 RB & SH engines, for use with HUDY Engine Bearing Puller set. 

Collet for extracting 14.0-14.5mm ID bearings used in .21 engines, for use with HUDY Engine Bearing Puller set. 

HUDY bearing presser adaptor for .12 engines made from black hardcoated 7075 T6 aluminum for unsurpassed lifespan and durability.  

HUDY bearing presser adaptor for .21 engines made from black hardcoated 7075 T6 aluminum for unsurpassed lifespan and durability.  

Optional support bushing for adapter of HUDY Bearing Presser for 0.12ci engine with bearing of 18mm OD, such as those used in new Novarossi engines. 

CNC-machined bearing checking tool, nicely machined from aluminum with typical HUDY design and look. Incredible light weight due to lightening holes in handle, diamond knurled pattern for maximum grip.  

Hudy Pinion Presser for safe, easy installation of slot car pinions, perfect for 1/32 and 1/24 racing. Frame is manufactured from high-strength aluminum alloy with signature HUDY black finish and distinctive silver edging. Smooth-operating, deep-threaded presser shaft made of world-renown Hudy Spring Steel™. Dimpled base is perfectly aligned with presser shaft, eliminating the possibility of bent armature shafts. 

Tough, lightweight graphite pinion caddy includes posts for 18 pinion gears. Fine color printed with HUDY logo and graphics. The perfect gear caddy for your toolbox, lets you quickly and easily keep track of your car gearing. 

Full set of premium-quality, 48pitch aluminum pinion gears for use on RC cars. Full range of 12-29T pinions, includes the exclusive #107150 HUDY Graphite Pinion Caddy. 

Full set of premium-quality, 64pitch aluminum pinion gears for use on RC cars. Full range of 18-35T pinions, includes the exclusive #107150 HUDY Graphite Pinion Caddy. 

The extra robust HUDY Wheel Nut Tool was specially developed to work on the 1/8 Buggy and Truggy 17mm wheel nuts in dirty and abusive conditions. No matter how tightly the wheel nuts are locked, the HUDY Wheel Nut Tool will allow you to very easily and comfortably release the wheel nut. The special design of the oversized handle gives you superior torque to tighten the wheel nuts (helping to ensure no more lost wheels) as well as loosening them. 

• Unique, highly-useful combination tool for nitro racing includes the following:
- 10mm socket wrench for Centax type flywheel nut
- 8mm socket wrench for glowplug
- 5mm hex bit for suspension pivotballs 

Simple, handy off-road wheel nut tool fits all standard 17mm buggy and truggy wheel nuts. Small size, fits perfectly in your tool bag. 

- professional-quality reamer cuts perfect holes 0-16mm diameter
- exclusive design by HUDY
- very light non-slip duraluminum handle
- special CAD-designed cutting head, hand-ground on specially-modified production machinery
- perfect & comfortable cutting and use 

Super-lightweight, professional-quality reamer for lexan bodies cuts perfect holes 0-9mm (0-0.35”) with special CAD-designed cutting blades. A handy aluminum cover protects the blade. Blades are hand-ground on a specially-modified grinding machine for maximum sharpness and lifespan. 

This unique tool in the line of 25 Years Anniversary Limited Edition of HUDY tools is the perfect reamer for cutting perfect circles in Lexan® bodies. The specially-designed and manufactured cutting head of this reamer have extra sharp blades that are set at a unique angle for perfect cutting every time.  

Replacement cutting head for #107600 Reamer. Special CAD-designed cutting head, hand-ground on specially-modified production machinery. Extra sharp for extremely easy hole cuting and reaming. 

Replacement cutting head for #107601 Reamer.  

• designed to easily and quickly remove caster clips and exhaust springs
• tip from specially hardened steel
• very light non-slip duraluminum handle
• very durable, long life
 

Replacement tip for #107610 Exhaust Spring/Caster Clip Remover. Made from specially hardened steel. 

This unique tool in the line of 25 Years Anniversary Limited Edition of HUDY tools is the perfect tool for removing and installing caster clips to adjust caster, wheelbase, and rear toe-in. It also is very useful for removing and installing exhaust springs. 

Handy hand tool for 1/8 on-road cars camber adjustment.  

Type: Arm Reamer

Tip size: 3.5mm
Tip length: 120mm

3.5mm Arm Reamer for 1/8 scale RC car arms

 

Type: Arm Reamer

Tip size: 3.0mm
Tip length: 120mm

3mm Arm Reamer for 1/10 scale RC car arms

 

Type: Arm Reamer

Tip size: 4.0mm
Tip length: 120mm

4mm Arm Reamer for 1/8 scale RC car arms
 

Type: Arm Reamer
Series: profiTOOLS R/C Tools

Tip size: 3.5mm
Tip length: 120mm

3.5mm Arm Reamer for 1/8 scale RC car arms 

Type: Arm Reamer
Series: profiTOOLS R/C Tools

Tip size: 3.0mm
Tip length: 120mm

3mm Arm Reamer for 1/10 scale RC car arms 

Type: Arm Reamer
Series: profiTOOLS R/C Tools

Tip size: 4.0mm
Tip length: 120mm

4mm Arm Reamer for 1/8 scale RC car arms 

This unique Limited Edition of HUDY tools is for precisely resizing plastic holes without creating excessive slop, allowing you to build a perfect free-moving suspension.

Features super-lightweight CNC-machined Swiss 7075 T6 aluminum handles with a diamond pattern surface for unsurpassed grip.

The tool is specially designed and hand ground to create sharp micro scurfies on the surface of the tool pin to precisely size plastic without tearing, stressing or over-sizing the hole of the suspension arm.

Handle includes the plastic cap in black color press fitted into the handle end. Optional color-coded plastic caps (violet, red, blue) are available to customize the tools to your specifications.
 

This unique tool in the line of 25 Years Anniversary Limited Edition of HUDY tools is the perfect tool for precisely resizing plastic holes without creating excessive slop, allowing you to build a perfect free-moving suspension. 

This unique tool in the line of HUDY tools is the perfect tool for precisely resizing plastic holes without creating excessive slop, allowing you to build a perfect free-moving suspension. 

• chassis droop gauge support blocks for 1/8 and 1/10 cars
• 2 pcs in a set
• allows adjustment of front/rear droop when used with #107711 Chassis Droop Gauge for 1/8, 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo 

• chassis droop gauge support blocks for 1/10 cars
• 2 pcs in a set
• allows adjustment of front/rear droop when used with #107712 Chassis Droop Gauge for 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo 

• chassis droop gauge support blocks (30mm) for 1/8 off-road cars
• allows adjustment of front/rear droop when used with #107711 HUDY Chassis Droop Gauge
• CNC-machined, made of high-quality lightweight duraluminum
• inside of the gauges additionally machined to minimize wall thickness and reduce unnecessary weight without compromising strength or durability
• black elox-coating for smooth, long-lasting finish and stylish look
• laser engraved with HUDY logo
• 2 pieces in a set  

Lightweight chassis droop gauge support blocks are a “must have” set-up tool for every off-road or truggy racer. The aluminum frame is CNC machined and drilled for super lightweight design and exact the size guarantees accurate & precise downstop measurements. 

• chassis droop gauge for 1/8 and 1/10 cars
• allows adjustment of the front/rear droop when used with #107701 Chassis Support Blocks for 1/8, 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• chassis droop gauge for 1/10 cars
• allows adjustment of the front/rear droop when used with #107702 Chassis Support Blocks for 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• for checking ride height of all RC cars
• steps from 0-15 mm in 1mm increments
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• chassis droop gauge for 1/10 nitro and electric touring cars
• allows ultra-fine and very precise adjustment of front/rear droop
• droop range (4.0-6.6mm) within most frequently used settings
• super-precise increments of 0.2mm (standard droop gauges typically use 1.0mm increments)
• CNC-machined, high-quality lightweight duraluminum  

• for checking ride height of all RC cars
• bevelled scale has ride height markings from 0-15 mm in 0.5mm increments
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• chassis ride height gauge for 1/10 nitro and electric touring cars
• allows ultra-fine and very precise adjustment of front/rear ride height
• ride height range (3.8-8.0mm) within most frequently used ride height settings
• super-precise increments of 0.2mm in the most frequently-used range (standard ride height gauges typically use 1.0mm increments)
• CNC-machined, high-quality lightweight duraluminum  

• chassis droop gauge for 1/8 off-road cars and truggy
• allows adjustment of front/rear droop (downstop) when used with #107703 or #107704 HUDY Chassis Droop Gauge Support Blocks
• droop range (0-13mm)
• CNC-machined, made of high-quality lightweight duraluminum
• inside of the gauges additionally machined to minimize weight without compromising strength or durability
• black elox-coating for smooth, long-lasting finish and stylish look
• laser engraved with HUDY logo and scale 

Highly-accurate precision stepped ride height gauge for checking the ride height of 1/10 & 1/12 pan cars. Stepped surfaces in the 2.6-5.6mm range have 0.2mm increments for fine adjustment.  

One-piece highly-accurate tool for quick downstop checking has an integrated support block that supports the chassis while the stepped scale indicates the downstop setting. Includes a downstop range of 1.0-6.5mm. 

• Chassis ride height gauge for 1/8 & 1/10 off-road cars
• Ride height range (30-17mm)
• CNC-machined, made of high-quality lightweight duraluminum
• Gauge interior additionally machined to minimize weight without compromising strength or durability
• Black elox-coating for smooth, long-lasting finish and stylish look
• Laser engraved with HUDY logo and scale 

High-quality, easy to use adjustable ride height gauge measures the 1/10 off-road ride height, particularly in racing where a lower ride height is used.  

High-quality, easy to use adjustable ride height gauge measures 1/10 and 1/8 off-road ride height. 

High-quality, easy to use adjustable ride height gauge measures 1/8 off-road ride height.  

HUDY Quick Camber Gauge for 1/10 electric and nitro touring cars allows you to perform quick & easy camber checks for 3 most frequently-used wheel camber angles: 1.5, 2.0, and 2.5°.  

HUDY Quick Camber Gauge for 1/8 off-road cars allows for quick and easy camber checks for the most frequently-used wheel camber angles: 1, 2 and 3°.  

Fully adjustable professional camber gauge for easy and fast camber adjustment by 1° increments in a total range of 5°~10°.  

Fully adjustable professional camber gauge for easy and fast camber adjustment by 1° increments in a total range of 5°~10°.  

Fully adjustable professional ride height gauge for easy and fast ride height  

Unique body gauge for checking nitro touring body and wing sizes for IFMAR, ROAR, FEMCA and EFRA rules.  

Unique body gauge for checking electric touring body and wing sizes for IFMAR, ROAR, FEMCA and EFRA rules. Measures track-width, body height, rear body clearance, wing side dams, and wing angle. A "must have" for tracks & clubs and serious racers. 

HUDY professional 1/10 TC wheel arch marker allows to make the wheel arches on bodyshell in a quick and simple way, and most importantly, the same way every time.  

Professional fully-adjustable droop gauge to check the droop of the suspension downtravel in range 80~140mm. 

Professional droop gauge to check the drop of the suspension downtravel in range 70~140mm. 

The HUDY Extra Resistant Cleaning Brushes feature unique fiber bristles that are resistant against oil and chemicals and will keep their shape for a longer time.  

HUDY large cleaning brush with soft bristles. Lightweight & compact, easy to use and clean. 

HUDY large cleaning brush with medium bristles. Lightweight & compact, easy to use and clean. 

HUDY large cleaning brush with stiff bristles. Lightweight & compact, easy to use and clean. 

The HUDY Extra Resistant Cleaning Brushes feature unique fiber bristles that are resistant against oil and chemicals and will keep their shape for a longer time.  

HUDY small cleaning brush with soft bristles. Lightweight & compact, easy to use and clean. 

HUDY small cleaning brush with medium bristles. Lightweight & compact, easy to use and clean. 

HUDY small cleaning brush with stiff bristles. Lightweight & compact, easy to use and clean. 

The HUDY Personal Racing Display is a compact all-in-one data center for professional RC car drivers, allowing you to record pertinent data for your set-up sheets. The display features large character and symbols for quick and easy readings. Aside from all of the data information, the built-in adjustable alarm clock can be used to notify you of your next heat or run. Powered by AAA 1.5V battery (not included). A “must have” device for serious racers. 

Professional RC pit lamp with powerful yet energy-saving LED light is the perfect solution to keep your pit table well lit.  

Premium-quality racing stopwatch with 100-lap memory. This professional stopwatch stores up to 10 hours with an accuracy of 0.01sec. 

Premium-quality racing stopwatch with 300-lap memory with extra-large XL display 

HUDY Pocket Scale represents a new level of sophistication in precision and high-tolerance electronics (0.01g/0.001oz) for the most detail-oriented racer. 

HUDY Professional Digital Pocket Scale 3000g/0.1g 

Thin, narrow, extra-high-strength fibre-reinforced tape for securing batteries in the chassis of electric touring cars. Eliminates the need for fixed battery brace systems reducing weight. Extra long 50m length. Features a black stylish finish. This special and unique tape is not widely available on the public market and as such is a hot item to have for any serious racer. 

Self-adhesive foam strip with dimensions of 1.5x13x155mm. Set of 2. 

Double-sided Velcro® tape to seal the body against the off-road chassis. 

Set of self-adhesive foam strips of dimensions 13x155mm (W x L) and thickness 1.5, 3.0, and 5.0 mm.