• chassis droop gauge support blocks for 1/8 and 1/10 cars
• 2 pcs in a set
• allows adjustment of front/rear droop when used with #107711 Chassis Droop Gauge for 1/8, 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo 

• chassis droop gauge support blocks for 1/10 cars
• 2 pcs in a set
• allows adjustment of front/rear droop when used with #107712 Chassis Droop Gauge for 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo 

• chassis droop gauge support blocks (30mm) for 1/8 off-road cars
• allows adjustment of front/rear droop when used with #107711 HUDY Chassis Droop Gauge
• CNC-machined, made of high-quality lightweight duraluminum
• inside of the gauges additionally machined to minimize wall thickness and reduce unnecessary weight without compromising strength or durability
• black elox-coating for smooth, long-lasting finish and stylish look
• laser engraved with HUDY logo
• 2 pieces in a set  

Lightweight chassis droop gauge support blocks are a “must have” set-up tool for every off-road or truggy racer. The aluminum frame is CNC machined and drilled for super lightweight design and exact the size guarantees accurate & precise downstop measurements. 

• chassis droop gauge for 1/8 and 1/10 cars
• allows adjustment of the front/rear droop when used with #107701 Chassis Support Blocks for 1/8, 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• chassis droop gauge for 1/10 cars
• allows adjustment of the front/rear droop when used with #107702 Chassis Support Blocks for 1/10
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• for checking ride height of all RC cars
• steps from 0-15 mm in 1mm increments
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• chassis droop gauge for 1/10 nitro and electric touring cars
• allows ultra-fine and very precise adjustment of front/rear droop
• droop range (4.0-6.6mm) within most frequently used settings
• super-precise increments of 0.2mm (standard droop gauges typically use 1.0mm increments)
• CNC-machined, high-quality lightweight duraluminum  

• for checking ride height of all RC cars
• bevelled scale has ride height markings from 0-15 mm in 0.5mm increments
• CNC-machined, made of high-quality lightweight duraluminum
• elox-coating for smooth, long-lasting finish
• engraved with HUDY logo and scale 

• chassis ride height gauge for 1/10 nitro and electric touring cars
• allows ultra-fine and very precise adjustment of front/rear ride height
• ride height range (3.8-8.0mm) within most frequently used ride height settings
• super-precise increments of 0.2mm in the most frequently-used range (standard ride height gauges typically use 1.0mm increments)
• CNC-machined, high-quality lightweight duraluminum  

• chassis droop gauge for 1/8 off-road cars and truggy
• allows adjustment of front/rear droop (downstop) when used with #107703 or #107704 HUDY Chassis Droop Gauge Support Blocks
• droop range (0-13mm)
• CNC-machined, made of high-quality lightweight duraluminum
• inside of the gauges additionally machined to minimize weight without compromising strength or durability
• black elox-coating for smooth, long-lasting finish and stylish look
• laser engraved with HUDY logo and scale 

Highly-accurate precision stepped ride height gauge for checking the ride height of 1/10 & 1/12 pan cars. Stepped surfaces in the 2.6-5.6mm range have 0.2mm increments for fine adjustment.  

One-piece highly-accurate tool for quick downstop checking has an integrated support block that supports the chassis while the stepped scale indicates the downstop setting. Includes a downstop range of 1.0-6.5mm. 

• Chassis ride height gauge for 1/8 & 1/10 off-road cars
• Ride height range (30-17mm)
• CNC-machined, made of high-quality lightweight duraluminum
• Gauge interior additionally machined to minimize weight without compromising strength or durability
• Black elox-coating for smooth, long-lasting finish and stylish look
• Laser engraved with HUDY logo and scale 

High-quality, easy to use adjustable ride height gauge measures the 1/10 off-road ride height, particularly in racing where a lower ride height is used.  

High-quality, easy to use adjustable ride height gauge measures 1/10 and 1/8 off-road ride height. 

High-quality, easy to use adjustable ride height gauge measures 1/8 off-road ride height.  

HUDY Quick Camber Gauge for 1/10 electric and nitro touring cars allows you to perform quick & easy camber checks for 3 most frequently-used wheel camber angles: 1.5, 2.0, and 2.5°.  

HUDY Quick Camber Gauge for 1/8 off-road cars allows for quick and easy camber checks for the most frequently-used wheel camber angles: 1, 2 and 3°.  

Unique body gauge for checking nitro touring body and wing sizes for IFMAR, ROAR, FEMCA and EFRA rules.  

Unique body gauge for checking electric touring body and wing sizes for IFMAR, ROAR, FEMCA and EFRA rules. Measures track-width, body height, rear body clearance, wing side dams, and wing angle. A "must have" for tracks & clubs and serious racers. 

??? checking & optimizing chassis balance
??? fits on-road & off-road cars
??? small & lightweight
??? easy to use
??? CNC-machined
??? made of high-quality lightweight duraluminum
 

The world's first professional tweak station now available also separately, exclusively from HUDY. Previously available only in the #108055 All-in-One Set-Up Solution for 1/8 On-Road Cars. 

The world's first professional tweak station now available also separately, exclusively from HUDY. Previously available only in the #108255 All-in-One Set-Up Solution for 1/10 Touring Cars. 

The HUDY Quick-Tweak Station allows you to quickly and easily check and correct tweak on your race car to help ensure proper, consistent handling. 

Correct tweak is one of the most important concerns that influences the overall performance of the car; a badly tweak car has a very negative impact on a car's handling. As such, checking and correcting tweak is a very important matter; pro racers check for tweak a number of times after each run. 

HUDY Tweak Board is a very handy and useful tool for making sure that the chassis and top deck are completely straight after tightening down the top deck screws. The tweak board is used by all the professional drivers between runs to achieve a perfectly straight car without any unwanted mechanical tweak.

The HUDY Tweak Board fits all standard touring cars with motor in front, middle or rear.  

Alu front platform with scale & bubble for Quick-Tweak Station #107904. Replacement spare part. 

Adjustable feet for the Quick-Tweak Station #107904.  

Standard spare part for #107903 and #107904 Quick Tweak Stations. 

Set-up system for 1/8 on-road cars (with 12mm wheelaxle): Serpent, HPI, Kyosho, Neo, SMP

Set-up system is used for adjustment of:
• camber & camber intake
• caster
• toe-in/out
• steering throw symmetry 

Set-up System for all 1/8 on-road cars: Fits all 1/8 nitro on-road cars.

Set-up system is used for adjustment of:
• camber & camber rise
• caster
• front and rear toe
• steering throw symmetry 

Spare alu set-up triangle for alu HUDY set-up systems. 

CNC-machined upside measure plate (toe plate) for setting up 1/8 on-road cars. 

Set-up System for all 1/8 on-road cars: Fits all 1/8 nitro on-road cars.

The HUDY ALL-IN-ONE SET-UP SOLUTION is an innovative and revolutionary set of expertly designed and crafted set-up tools delivered as integrated all-in-one set-up solution for complete R/C car set-up and it includes:
• universal exclusive alloy set-up system for 1/8 on-road cars
• professional tweak station (only available as part of all-in-one solution)
• chassis support blocks
• chassis droop gauge
• chassis ride height gauge
• flat set-up board
• set-up board decal
• alu carrying case with foam inserts
• full colour, indepth set-up book 

CNC-machined alu. nuts for use with Alu Set-up System stands. Allows for quick & easy assembly and disassembly. Knurled surface provides easy grip. 

CNC-machined premium-quality aluminum set-up wheels for 1/8 on-road cars allow for perfectly precise and repeatable set-up adjustment and tweak correction. 

Set-up system for 1/10 on-road cars (with 10mm wheelaxle): Serpent, Picco, Mugen, Neo

Set-up system is used for adjustment of:
• camber & camber intake
• caster
• toe-in/out
• steering throw symmetry 

Redesigned and improved HUDY stylish touring car stand for 1/10 electric and nitro touring cars as well any 1/12 and formula. 

Redesigned and improved HUDY stylish car stand for 1/10 off-road cars. 

This compact, stylish stand for 1/8 buggies and truggies is great for providing a super-stable platform when working on your vehicle. Its clean smooth design and black powdercoated surface ensure maximum long life and it is very handy to pack for travel.  

??? suitable for setting up all 1/8 on-road cars
??? board for comfortable setup adjustments
??? exceptionally flat, warp-resistant surface
??? suitable for setting up all RC cars 

??? suitable for setting up all 1/10 RC cars
??? board for comfortable setup adjustments
??? exceptionally flat, warp-resistant surface
??? very small, compact size
 

HUDY Lightweight Set-up Board edition 

- HUDY ultimate RC car set-up board
- from the Originator of the concept
- suitable for 1/10 and 1/12 RC cars
- dependable reference surface
- for precise set-up adjustments
- special materials & manufacturing technologies 

??? HUDY ultimate RC car set-up board
??? from the Originator of the concept
??? suitable for 1/10 and 1/12 RC cars
??? dependable reference surface
??? for precise set-up adjustments 

• HUDY ultimate RC car set-up board
• from the Originator of the concept
• suitable for 1/10 and 1/12 RC cars
• dependable reference surface
• for precise set-up adjustments 

• setup decal for #108200 Flat Setup Board 340 x 540 mm for 1/8, 1/10
• accurate, clear markings with 1mm grid for adjustment of 1/8 and 1/10 cars
• tough, smooth plastic surface, liquid-resistant


 

• setup decal for #108201 Flat Setup Board 290 x 425 mm for 1/10
• accurate, clear markings with 1mm grid for adjustment of 1/10 cars
• tough, smooth plastic surface, liquid-resistant
 

• setup decal for #108202 Flat Setup Board for 1/8 Off-road & Truggy
• super easy track width adjustment
• accurate, clear markings with 1mm grid for adjustment of 1/8 off-road car &truggy
• tough, smooth plastic surface, liquid-resistant 

Setup decal for #108202 Flat Setup Board for 1/8 Off-road & Truggy is made from tough plastic and provides a smooth, liquid-resistant surface for quick & easy track-width adjustment.
 

Complete Set-up System for all 1/10 Touring Cars: Fits all 1/10 nitro and electric touring cars.

All the set-up tools you need to tune your nitro or electric touring car are now packaged and delivered in one complete, ultimate setup package:
• Universal Set-Up System
• chassis support blocks
• chassis droop gauge
• chassis ride height gauge
• flat set-up board
• set-up board decal

Using this Ultimate Set-Up System you can very simply and easily set up your RC car’s chassis geometry:
• downstops (droop)
• camber & camber intake
• caster
• front and rear toe-in/out
• steering throw symmetry
• ride height
• track width 

Set-up System for all 1/10 touring cars: Fits all 1/10 nitro and electric touring cars.

The HUDY ALL-IN-ONE SET-UP SOLUTION is an innovative and revolutionary set of expertly designed and crafted set-up tools delivered as integrated all-in-one set-up solution for complete R/C car set-up and it includes:
• universal exclusive alloy set-up system for 1/10 touring cars
• professional tweak station (only available as part of all-in-one solution)
• chassis support blocks
• chassis droop gauge
• chassis ride height gauge
• flat set-up board
• set-up board decal
• alu carrying case with foam inserts
• full colour, indepth set-up book 

HUDY???s ultimate set of set-up tools for 1/10 touring cars, all in one complete package with premium-quality carrying bag. This is a unique product, designed by HUDY for RC car racers who want smart and perfectly thought-out details. This is the perfect way to carry your set-up system with you to the track.  

HUDY authentic and original set-up board for 1/12 and 1/10 on-road cars. Exceptionally flat, warp resistant surface allows precise set-up adjustments. Easy to clean. This board is lightweight and compact size, very handy to pack for travel.  

Setup decal for Flat Setup Boards for 1/10 touring cars is made from tough plastic and provides a smooth, liquid-resistant surface for quick & easy track-width adjustment.  

Set-up System for on-road 1/8: Mugen

Set-up system is used for adjustment of:
• camber & camber intake
• caster
• toe-in/out
• steering throw symmetry 

All-new HUDY Lightweight Set-up Board edition 

Setup decal for Flat Setup Boards for 1/8 Off-road & GT is made from tough plastic and provides a smooth, liquid-resistant surface for quick & easy track-width adjustment.  

Set-up System for all 1/8 off-road cars: Fits all 1/8 off-road cars.

Set-up system is used for adjustment of:
• camber & camber intake
• caster
• toe-in/out
• steering throw symmetry 

Set-up System for all standard 1/8 off-road cars: Fits all standard 1/8 nitro off-road cars.

Set-up system is used for adjustment of:
• camber & camber rise
• caster
• front and rear toe
• steering throw symmetry

To use the set-up system for 1/8 truggies the separate #108841 Upside Measure Plate for 1/8 Truggy must be purchased. 

Spare upside measure plate for #108805 and 108856 set-up systems for 1/8 off-road cars. 

This CNC-machined upside measure plate (toe plate) for setting up 1/8 truggies is made of high-quality, tough acrylic plastic with precision engraved markings for instant, reliable readings.  

HUDY’s ultimate set of set-up tools for 1/8 off-road cars, all in one complete package with premium-quality carrying bag. This is a unique product, designed by HUDY for RC car racers who want smart and perfectly thought-out details. This is the perfect way to carry your set-up system with you to the track.  

CNC-machined alu. nuts for quick and easy use with the 1/8 off-road set-up system stands. 

CNC-machined premium-quality aluminum set-up wheels for 1/8 off-road cars allow for perfectly precise and repeatable set-up adjustment and tweak correction. Eliminates set-up errors inherent in using standard off-road tires. Precision-machined to exacting tolerances, each alu set-up wheel in a set is perfectly matched. 

Set-up System for all 1/10 off-road cars: Fits all 1/10 off-road electric cars.

Set-up system is used for adjustment of:
• camber & camber rise
• caster
• front and rear toe
• steering throw symmetry 

Spare alu adjustable shims for 1/10 off-road set-up.  

Aluminum shim fits on the wheel axle, and the set-up system leans against the shim.  

Spare upside measure plate for #108905 set-up system for 1/10 off-road cars. 

CNC-machined alu nuts for quick and easy use with the 1/10 off-road set-up system stands. The nuts can also be used for quick mounting of tires for ride height adjustment; this helps to save time and effort from mounting/unmounting tires. Each side of the nut has a different thread for wheel axles: one side is M4 thread, while the other side is 8-32 UNF thread (for American cars). 

Set-up System for all 1/10 touring cars: Fits all 1/10 nitro and electric touring cars.

Set-up system is used for adjustment of:
• camber & camber intake
• caster
• toe-in/out
• steering throw symmetry 

Set-up System for all 1/10 touring cars: Fits all 1/10 nitro and electric touring cars.

Set-up system is used for adjustment of:
• camber & camber rise
• caster
• front and rear toe
• steering throw symmetry 

Set-up System for all 1/10 formula cars.

Set-up System is used for adjustment of:
• Toe-in and toe-out
• Steering throw symmetry
• Steering angle adjustment
 

Wheel axle adapter for use with #109305 Set-up System to set up 1/10 formula cars. Set of 2. 

Spare upside measure plate for set-up systems for 1/10 touring cars. 

CNC-machined alu. nuts for quick and easy use with the 1/10 touring set-up system stands. 

CNC-machined premium-quality aluminum set-up wheels for electric and nitro 1/10 touring cars allows for perfect, precise and repeatable set-up adjustment and tweak correction. Eliminates the errors inherent in using standard rubber tires or foam tires. 

Set-up System for all 1/10 & 1/12 pan cars: Fits all 1/10 & 1/12 pan cars.

Set-up system is used for adjustment of:
• camber & camber rise
• caster
• front and rear toe
• steering throw symmetry 

Wheel axle adapter for 1/10 & 1/12 set-up system. Set of 2. 

Set-up system for 1/5 on-road cars: FG, Harm (including alu nuts).

Set-up system is used for adjustment of:
• camber & camber intake
• caster
• toe-in/out
• steering throw symmetry 

Alu nut for set-up system for 1/5 on-road cars. Set of 4. 

Set-up System for T-Maxx, E-Maxx

Set-up system is used for adjustment of:
• camber & camber intake
• caster
• toe-in/out
• steering throw symmetry 

Spare rubber O-ring for 1/8 On-Road Set-Up Wheel. Set of 4